Silicone Suction Pet Bowl

Product Overview

Keep two feeding surfaces in one coordinated setup with a sage green silicone bowl holder and a removable stainless steel insert. The outside has a softly ribbed profile, a tilted opening and a broad round suction-style foot. Small opposing tabs sit at the rim, and the smooth metal liner fits inside the silicone body for a conventional open-bowl feeding surface.

Removing the metal insert reveals the green silicone interior and its small raised feeding nubs. This gives you a second way to arrange food within the same holder. The different surfaces change the shape of the feeding area, but no particular eating speed, health effect or prevention of choking is promised. Choose the arrangement your pet can use comfortably.

The listing is for one green holder with one stainless steel insert, approximately 15 cm across and 8 cm high as listed in the supplied size information. Its suction-style base is intended for an appropriate smooth surface. Actual grip varies with floor texture, moisture, cleanliness and the way your pet interacts with the bowl.

Key Features

• Removable steel liner: A smooth stainless steel insert lifts out for separate cleaning and exposes the silicone interior below.
• Silicone feeding surface: Small raised nubs are present inside the green holder for an alternative food arrangement when the liner is removed.
• Broad suction-style foot: The circular base contacts the supporting surface; performance depends on the surface and placement.
• Tilted opening: The rim sits higher at the back and lower toward the front of the feeding area.
• Ribbed outer body: Softly molded external ribs give the holder its rounded profile and visible texture.
• Coordinated two-part set: One sage green silicone holder and one silver stainless steel insert form the selected product.

Product Specifications

How to Use

1. Clean the base and choose a smooth, level, nonporous supporting surface. Press the foot down gently and test its hold before adding food. Do not rely on suction on rough or porous floors.
2. For the smooth feeding surface, seat the steel insert evenly inside the holder. For the silicone surface, remove the insert and arrange a measured portion around the raised nubs.
3. Keep food or water below the low edge of the tilted rim. Observe your pet during feeding, remove leftovers promptly, and release the base gently before lifting the holder.

Care & Usage Instructions

• Separate the steel insert from the silicone holder and hand wash both with mild detergent and a soft sponge.
• Clean around the silicone nubs, rim, tabs and base so residue does not build up. Rinse thoroughly and dry each part before reassembly or storage.
• Check for silicone tears, damaged tabs or sharp metal edges before use. Heating, dishwasher and sterilizer compatibility have not been confirmed.

Important Notes

Includes only the selected product and components listed above. Pets, people, food, mats and other scene accessories are excluded. Dimensions and weights are approximate; minor color and surface variations may occur with production, lighting and screen settings.

Frequently Asked Questions

Are both components included?
Yes. One sage green silicone holder and one removable stainless steel insert are included.

Is the silicone interior plain?
No. Small raised nubs are visible when the steel insert is removed. The metal insert itself has a smooth interior.

Will the base attach to every floor?
No. Suction depends on surface condition and material. Use a clean, smooth, nonporous surface and check the hold.

Can it prevent choking or treat posture problems?
No such benefit is guaranteed or claimed. It is a feeding accessory with two available interior surfaces.

What is the capacity?
A capacity figure was not supplied. Use measured portions and keep contents below the lower edge of the rim.